|
|
Home > DIY baby shower polka dot cone favor box
| | |
|
DIY Baby Shower Polka Dots Cone Favor Box
Supplies:
Directions:
1. Lay out all the materials you will need for this project.
2. Grab one of the Polka Dots Cone Favor Box and start assembling it toward the center.
3. Place about 12 pieces of almonds inside the box.
4. First close the box. Next Glue two top taps together with hot glue.
CAUTION: Hot melt glue gets hot!
5. Grab about
15” inches of the 7/8" Blue Polka Dots Grosgrain Ribbon and fold it into a bow. Then tie it off by forming a knot in the middle. Cut the ends of the ribbon evenly to make it look neater.
6. Grab about 10
” inches of the Polka Dots Organza Ribbon and perform the same as step #5.
7. Glue the grosgrain ribbon onto the top of the favor box.
CAUTION: Hot melt glue gets hot!
8. Glue the organza ribbon onto the top of the grosgrain ribbon.
CAUTION: Hot melt glue gets hot!
9. Glue the blue clear acrylic charm bear onto the top of the ribbons.
CAUTION: Hot melt glue gets hot!
Congratulations. Here is how your finish product should look.
| |
| | |
|
Dear Customer,
Local pick up is free, but your order must a minimum of $50.
|
|
|